Car Cylinder Head,Cylinder Head,Engine Cylinder Head,Auto Cylinder Head Zhejiang Noken Mechanical Technology Co., LTD , https://www.nkcasting.com
**FEATURES**
• Removes 99% of Liquid and Solid Entrainment Particles Larger Than 4 Microns
• Easy Maintenance
• Three Flow Configurations
• Gas, Steam, or Air Applications
• High Efficiency Over Wide Flow Range
**OPTIONS**
• ASME Code Stamp
**High-Efficiency Separation**
Down to 4 Microns. The unique two-stage design of these Series CLC Coalescers/Separators allows them to remove 99% of all liquid and solid particles larger than 4 microns in size. Standard, one-stage separators are only capable of removing particles larger than 10 microns in size. The efficiency of Eaton's Coalescer/Separator far exceeds that of any other type of centrifugal, cyclone, turbine, or vane type separator. And it works with no moving parts to fail or wear out.
**Applications**
The Eaton Coalescer/Separator provides two-stage separation of liquid that is in the form of a fine mist or fog from a gas or vapor. The Coalescer/Separator is primarily used in applications where a fine mist is encountered in processes involving cooling, condensation, flashing, or evaporation, such as:
• Compressed refrigeration gases
• Evaporator overhead steam
• Compressed air prior to desiccant dryer beds
• High-pressure gas at injection wells
• Fuel gas lines to engines in power
• Industrial plants
• Natural gas and gas distribution lines
• Regulator stations
**Two-Stage Separation**
In the first stage, the coalescer stage, smaller liquid droplets enter a special wire mesh de-misting pad in the vessel. The pad's purpose is to increase the size of the droplets as they pass through it so they can be removed. The larger liquid droplets exit the de-misting pad and enter the second, separation stage. In the second stage, the droplets are centrifugally thrown to the outside wall of the vessel by a unique Cenpellarâ„¢ and flow to the bottom for draining. Eaton's Vortex Containment Plate (VCP) prevents the droplets from being re-entrained after separation.
**Easy Maintenance**
The only maintenance required is the inspection, cleaning, or replacement of the de-misting pad. This is easily accomplished through either a quick-opening body closure or body flanges.
**Engineering Specifications**
All gas/liquid separators are fabricated in carbon steel or stainless steel construction with two-stage coalescer/separator design and flanged connections. Separators have an ASME Code Stamp.
------------------------------------------------------------------------------------------------------------------------------------------------------
The Exclusive Eaton Vortex Containment Plate (VCP)
In the past, separators have often operated at less than peak efficiency due to the re-entrainment of separated liquid at normal or high flow rates. The Eaton VCP solves this problem. The VCP utilizes carefully placed rings that shield the separated liquid from the vortex action inside the separator and direct it to the separator drain. The turbulence of the swirling gas or air flow is sheltered from the liquid and cannot be re-entrained after separation.
The VCP features extremely heavy duty construction, unlike the delicate baffles used by other systems. And the Eaton VCP is completely maintenance free. The charts on the right graphically depict the high efficiency of Eaton's exclusive Vortex Containment Plate. They show the percentage efficiency versus air flow when the separator is operated at 1 and 3 atm with a water input rate of 150 pounds per hour. Two typical 3" gas/liquid separators that do not contain the Eaton Vortex Containment Plate are compared to a Type 31L Eaton Separator. The performance standard was the removal of all liquid and solid entrainment where particle sizes exceeded 10 microns.
Applications
Steam
Eaton Gas/Liquid Separators are often installed ahead of steam turbines to protect the turbine blades from the erosive action of wet steam, pipe scale, and other damage-causing entrained solids. They are also installed in steam distribution lines to assure clean, dry steam enters heat exchangers, pressure reducing valves, temperature regulators, meters, and other process equipment.
**Compressed Air**
Compressed air lines have Eaton Gas/Liquid Separators installed following intercoolers and aftercoolers to remove entrained moisture that would otherwise cause damage in successive stages of compression or to subsequent processes. They are used for entrainment removal in primary air lines leading to air-using equipment such as air chucks, air nozzles, and paint spray equipment. They are particularly suitable for long runs of pipe and where wide temperature differentials are found. The units are highly efficient for moisture separation of refrigerated air dryer packages.
**Compressed Gas**
Eaton Gas/Liquid Separators are used in conjunction with intercooler and aftercooler equipment installed on gas compressors. They are very effective in the removal of oil, tar, water, and other unwanted entrainment.
**Geothermal Applications**
Eaton Gas/Liquid Separators are used in geothermal systems to manage the challenges posed by superheated steam and impurities. These separators ensure efficient removal of particulate matter and moisture, preventing damage to critical components like turbine blades.
**Vapor Collection and Destruction Applications**
Eaton separators are used in vapor collection systems to remove hazardous compounds, ensuring safety and environmental compliance. They are especially useful in applications where flame arresters and detonation arresters require protection from contaminants.
**Landfill and Waste Gas Applications**
These separators are essential in landfill gas systems, where they help in managing methane and other waste gases, protecting equipment from contamination and improving system efficiency.
**Exhaust Head Applications**
Eaton separators are used in exhaust systems to prevent the release of harmful substances into the environment, ensuring compliance with environmental regulations.
**Food Processing Applications**
In food processing, Eaton separators are used to remove chili dust and oil particles from the air, creating a safer working environment and maintaining product quality. They are often integrated with misting systems to prevent caking and ensure smooth operation.
Overall, Eaton’s CLC series of coalescer/separators offer a robust solution for a wide range of industrial applications, providing reliable performance, ease of maintenance, and high efficiency in separating liquids from gases.
Model NO.: type CLC
Distillation Equipment Type: Steam Distillation Equipment
Extraction Tower Type: Vibration Plate Tower
Pressure: High Pressure
Condition: New
Metal: Carbon Steel, Stainless Steel, Cast Iron
Connection: Threaded, Flanged, Weld
Certificate: ASME Um, U Code
Unit: Set
Trademark: Eaton
Transport Package: Wooden
Specification: 1~5 inch
Origin: China
HS Code: 8421299090
Made by **Weight Austin, from 1894**
• Centrifugal In-line Gas/Liquid Separators
• Two-Stage Design for Maximum Efficiency
• Flanged Connections
• Carbon Steel or Stainless Steel Construction
• Horizontal or Vertical Flow