[MATERIAL]PET, Water and dust resistant, disposable, easy to clean, protective cover can be cleaned with disinfectant, not wash in high temperature and high pressure. Protective Face Shield,Splash Face Shield,Safety Plastic Face Shield,Disposable Face Shields Shenzhen Stardeal Industrial Co.,Ltd , https://www.szplasticblisterpack.com
1. The sample is not uniform. For example, they have different ingredients. The more uneven the sample, the more samples are needed to obtain better reproducible results.
2. The selected drying time is too short. Extend the drying time or choose the appropriate off mode "weight loss per unit time".
3. The sample is not completely dry (eg due to surface crusts). Try mixing quartz sand for drying.
4. The selected temperature is too high or the sample is oxidized. Reduce the drying temperature.
5. The sample boils and continuously splashes from the moisture meter to change the temperature. Please clean the protective glass.
6. When the protective glass is eroded, the amount of heating cannot be fully utilized. Please clean the protective glass.
7. The temperature sensor is contaminated or damaged. Please clean the temperature sensor.
8. The console is not stable. Please use a stable console.
9. The external environment is unstable (vibration, etc.).
[FACE PROTECT]This face shield is designed to protect your whole face from spray and splatter, droplet, dust, oil smoke and so on.
[WIDE APPLY]General protection, Suitable for home, shop or dental use, dust and splash proof.
[COMFORTABLE ]The surface contacts with the skin has a soft sponge, the rope is elastic and comfortable to wear.
Moisture meter measurement shows poor repeatability: