Tower Crane wire rope is usually used on the tower crane hoisting mechanism, trolleying (luffing) mechanism and slewing mechanism. BQ could provide all models of Wire Rope for Tower Crane. The diameter of tower crane steel wire rope could be 12mm, 14mm, 16mm, 18mm, 20mm, 22mm. 16mm Wire Rope could be used for 12-14 ton Tower Crane. 18mm Steel Wire Rope could be used for 16ton tower crane. Tower crane wire rope could be galvanized wire rope, Non-Rotating Wire Rope, bright wire rope, stainless steel wire rope. Wire Rope Wedge is used for fixing or connecting the wire rope of tower crane.
Steel Wire Rope,Tower Crane Wire Rope,Galvanized Wire Rope,Stainless Steel Wire Rope,Steel Rope SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sytoplesstowercrane.com
Atlas Copco introduces a marine start-up air compressor unit with a new LT KE water-cooled piston compressor with power up to 90 kW (125 hp). Atlas is committed to the development of marine compressed air systems, including start-up, work and instrument air compressors, as well as air aftertreatment solutions and pneumatic tools. The range of aluminum LT piston starter air compressors is 2–15 kW, while the newly developed LT KE cast iron housings start air piston compressors range from 60 m3/h (18.5 kW) to 430 m3/h (90 kW).
The new LT KE piston can withstand ambient temperatures up to 60 ° C (140 ° F) and is designed for the engine compartment; it has a small footprint, noise as low as 91 dB (a), base amplitude below 14 mm / s; available sea water or Fresh water cooling, synthetic oil and mineral oil are also suitable.
The forced heating of the crankcase is also enhanced by forced air convection, which helps to eliminate condensate. In addition, the cooling water shutoff solenoid valve prevents condensate from damaging the compressor. The LT KE piston machine is easy to install and has low maintenance and operating costs.
Thanks to the introduction of the new LT KE water-cooled piston compressor, Atlas Copco has once again expanded its marine compressor products with new and economical air solutions. Of course, there are other ancillary products (gas cylinders, work or instrument air compressors), and air aftertreatment equipment. The company is developing a fully certified, air-cooled LT KE compressor that is expected to be launched in the first quarter of 2012.