Model NO.: UIB
Measuring Media: Liquid or Gas
Measuring Principle: Mechanics
Measurement Object: Closed Pipeline
Certification: JIS, DIN, CE, ISO
Working Temprature: -50 ~+260 Degree C
Process Pressure: 0~42MPa
Output Signal: 4~20mA, RS485, Frequency
Explosive Requirements: Exd II Bt4
Maximum Measurement Range: 20:1(Liquid)or 10:1(Gas)
Trademark: U-ideal
Transport Package: Carton Packing or as Customers′ Need
Specification: Carbon steel, Stainless steel
Origin: Tianjin, China
HS Code: 90261000
Target flow meter

1. Typical applications

Gas:Coal gas, air, hydrogen, natural gas, nitrogen, liquefied petroleum gas (LPG), hydrogen peroxide, flue gases, methane, butane, chlorine, etc.
Liquid:heavy oil, paraffin, pitch, vitriol, cooking oil, residual oil, acetone, diesel oil, mine water, detergent, soy, gasoline, silicone oil, syrup, solvent , perfume, seawater, aviation kerosene, Soap ketone water, glucose, Vegetable oleic acid, saline water, paste, ink, coolant, glycol, mineral oil, Liquid sugar, hydrochloric acid, automobile coatings , resin, beef tallow, rape oil, liquid oxygen, liquid shampoo, toothpaste, gelatin, fuel oil, milk, decolorizer, modifier, soda, additive, cleaning agent, alkaline, ammonia, bunker oil, chemical reagent, kerosene, glycerin, dye, water, Nitric acid high boiling point organic solution, lard, ethyl alcohol, oil, ethylene, polypropylene, methylbenzene, etc.
Steam:superheated steam, saturated steam.
Target Flow Meter for Diesel, Heavy Oil, Lubrication Oil
This Screen display pressure, temperature and density, is only for pressure and temperature compensation model.
Target Flow Meter for Diesel, Heavy Oil, Lubrication Oil

2.Table of technical parameters   

Measured medium Any Liquid include high viscosity oil,  Gas   Steam
Nominal diameter Flange type 15~500mm Clamp on type15~500mm Insert type65~5000mm
Nominal pressure 0.6~42MPa 0.6~42MPa 0.6~42MPa
Media temperature -200ºC~+700ºC or higher temperature
Accuracy ±0.2% ±0.5% ±1.0% ±1.5%
Range degree 1:3(liquid) 1:8(liquid, gas) 1:15(liquid, gas) 1:12(steam)
Compensation type Temperature compensation; pressure compensation
Repeat-ability 0.05%~0.08%
Power supply Built-in 3.6V Li batter; external power supply of 24VDC
Output forms Site display reading; 4~20mA (2-wire system); pulse; 0~5V; RS232/RS485; GPRS wireless transmission; HART
Material of measurement tube Carbon steel; SS; also supplied to user requirement
Explosion-proof sign Intrinsically safe type (ExiallCT4); Explosion isolating type (ExidllCT4)
Protection class IP65; IP67
Flange specification Flow meter connecting flange specification execute the GB/T series standard, also process to user requirement 

3.  Model selection
UIB - Target Flow meter
Code Connection type
F: Flange C: Insert D: wafer connect X: inline dismountable G: Taper pipe thread E: Else
Code Medium type
L Liquid G Gas S Steam
  Code Pressure class
A 0.6 Mpa E 2.5 Mpa I 10 Mpa M 20Mpa
B 1.0 Mpa F 4.0 Mpa J 11 Mpa N 25 Mpa
C 1.6 Mpa G 5.0 Mpa K 15 Mpa O 26 Mpa
D 2.0 Mpa H 6.3 Mpa L 16 Mpa P 42 Mpa
  Code Medium temperature
C -40 ~ 80ºC(ambient temperature)
Z 80 ~ 200ºC(middle temperature)
G 200~ 700ºC(high temperature)
D -200~ -40ºC (low temperature)
  Code Output form
P Pulse output H HART protocal
I 4~20mA K Switch output
R Communication output N No-output
  Code Explosion-proof sign
A Intrinsically safe D Explosion isolating
  Code Housing material
C Carbon steel
S 304SS
E 316SS
X Specific material
  Code Sensor material
S SS316
T Titanium
H Hastelloy
X Specific material
 
Note:the flowmeter also can be customized
according to the requirement of customer. 		Code Compensation function
P Pressure compensation
T Temperature compensation
D Temperature & pressure compensation
W No compensation

Dry Magnetic Separator

Feeding Equipment Co., Ltd. , http://www.jxfeeder.com