Square Downspipe Roll Forming Machine
Square Downpipe Roll Forming Machine is PLC control, full automatic, mould cutting.
Our products are widely used in various factories, civilian building, warehouse and other steel structure building.
Specifications:
Working process:
Decoiler - Feeding guide - Straightening - Main roll forming machine - PLC control system - Cutting - Exit rack
Pictures of machine:
Training and Installation : Square Downspipe Roll Forming Machine,Aluminum Square Downspipe Roll Forming Machine,Steel Square Downspipe Roll Forming Machine,Plc Square Downspipe Roll Forming Machine YingYee Machinery and Technology Service Co.,Ltd , https://www.yingyee.cn
Raw material
PPGI or GI
Material thickness range
0.2-0.8mm
Rollers
18 rows
Material of forming rollers
45# steel with chromed
Shaft diameter and mateiral
76mm, material is 40Cr
Material of cutting blade
Cr12 mould steel with quenched treatment
Forming speed
12-15m/min(excluding cutting stoping time)
Main motor power
4 KW
Hydraulic station power
3KW
Mode of cutting
Hydraulic cutting or flying saw cutting or mould cutting
Control system
PLC Frequency Control System with touch screen
1. We offer installation service local in paid, reasonable charge.
2. QT test is welcome and professional.
3. manual and using guide is optional if no visiting and no installation.
Certification and after service:
1. Match the technology standard, ISO producing certification
2. CE certification
3. 12 months warranty since the delivery. Board.
Our advantages:
1. Short delivery period.
2. Effective communication
3. Interface customized.
It is reported that the National Development and Reform Commission and the Ministry of Finance will issue financial subsidies for high-efficiency lighting products in batches. The provincial energy-saving authorities will work with the financial departments to formulate specific implementation plans, organize the winning enterprises to implement the promotion tasks, and ensure the implementation of financial subsidies during the 12th Five-Year Plan period. Efficient lighting products are over 100 million. Eliminating incandescent lamps has become an international trend. Incandescent lamps that have been used by humans for more than a hundred years were invented by Edison in the electrical age. Currents are heated by tungsten filaments and then illuminate. The principle is simple and the cost is low, but it is not energy efficient. Incandescent lamps use 90% of the electrical energy to be converted into heat rather than light, causing a lot of energy wastage. Energy-saving fluorescent lamps consume less power than incandescent lamps that use tungsten filaments as illuminants. Fluorescent lamps emit only as much light as incandescent lamps with only 20 electric energy. They last longer than incandescent lamps and last about 5-10 for incandescent lamps. Times. Although the price is more expensive than incandescent lamps, in the long run, the overall cost of purchasing energy-saving lamps is lower than that of incandescent lamps due to longer service life and lower cost of expenditure. In addition, old-fashioned incandescent lamps consume a large amount of greenhouse gas emissions such as carbon dioxide due to high energy consumption. In the context of global warming, this is another key reason for the incandescent lamp to go to class. At present, there has been a wave of elimination of incandescent lamps in the world. Xie Zhenhua said that in 2006, a research report of the International Energy Agency proposed that if the incandescent lamps were gradually phased out from now on, by the year 2030, the world could save 38 tons of lighting electricity and reduce carbon dioxide emissions by 16.6 billion tons. In the first two years, the Australian National Environment Minister stated that Australia will phase out incandescent lamps within three years. On March 9th of the same year, at the spring summit of the European Union, the EU countries reached a consensus. Within two years, European countries will gradually replace the old-fashioned incandescent bulbs with high energy consumption with energy-saving fluorescent lamps to reduce greenhouse gas emissions. From Australia to Europe, the end of the era of incandescent lamps is being declared everywhere, replaced by energy-saving fluorescent lamps. Statistics show that the penetration rate of energy-saving lamps in China is still low. The proportion of incandescent lamps used by small and medium-sized cities is generally above 50, and the proportion of incandescent lamps used in rural areas is even larger. At present, China's lighting electricity accounts for about the total electricity consumption of the whole society. 12. Analysts pointed out that with the economic development and the improvement of people's living standards, China's lighting power consumption will further increase, and by promoting the use of high-efficiency lighting products. China's energy saving potential will further increase. Xie Zhenhua said that in the face of the global wave of eliminating incandescent lamps, the Chinese government and the United Nations Development Programme and the Global Environment Facility will cooperate to phase out incandescent lamps, accelerate the promotion of energy-saving lamps, and support Chinese incandescent lamp manufacturers to convert energy-saving lamps. The market for China's energy-saving lamps is eagerly awaiting the era of incandescent lamps in the world, but the realization of this goal cannot be completed overnight. Although the cost can be saved in the life cycle, it has a certain market. However, because the models of energy-saving lamps on the market are far less abundant than incandescent lamps, unable to apply different lamp systems, and the price is relatively expensive, the popularity is not Very wide. A spokesman for the Australian Environment Minister also said that the elimination of incandescent lamps is not likely to happen overnight. The first step will encourage producers, importers and retailers to provide adequate supply of energy-saving lamps and gradually reduce incandescent lamps. The Australian government is also considering giving exceptions to applications for special occasions, such as lighting for medical equipment and oven bulbs, and energy-saving lamps are not suitable. According to the statistics of China Lighting Association, China is the world's largest producer and exporter of energy-saving lamps. More than 85 energy-saving lamps in the world come from China. In 2006, the output was nearly 2.4 billion, of which 80 were sold abroad; The annual consumption of high-energy incandescent lamps is still around 3 billion. When the whole society unanimously called for the use of energy-saving lamp products to save energy, China's energy-saving lamp products are experiencing a slap in the domestic market. In the Dazhong, Gome and other home appliance chain markets in Chaoyang District, Beijing, energy-saving lamps are in a prominent position, and salesmen generally recommend the use of energy-saving lamps. However, after careful observation, it is found that the sales are basically foreign brands such as Osram and Philips. The price is roughly between 20 and 27 yuan, and there are not many domestic brands of energy-saving lamps. Conversely, in some small shops and lighting markets, many domestic energy-saving lamps can be seen. The high price is 12 yuan, the low price is only 5 yuan, and the product packaging only has the words such as energy saving. Chen Yansheng, chairman of the China Lighting Association, believes that there are many reasons for the current fragrance of the wall of the energy-saving lamp product. The first is because the foreign market demand is relatively large, so the export of energy-saving lamps is promising; there are more domestic energy-saving lamps manufacturers, the quality of the products is uneven; at the same time, due to fierce competition in the domestic market, some manufacturers arbitrarily suppress prices, resulting in energy-saving lamps The product is not recognized in the domestic market. Under the combined effect of various factors, the whole market has formed a vicious circle. At present, China has already had relevant national standards for energy-saving lamps, but some small-enterprise products do not meet the requirements of national standards. The non-standard operation of small enterprises is bound to have an impact on large enterprises and brand products, affecting the cultivation of the entire market. At present, some foreign large enterprises, such as Philips, have a good sales situation in the domestic market. An important reason is that the brand effect of these products is good. Domestic enterprises have a certain gap with these large international companies because of their brand accumulation, but they do not have an advantage in market competition.