Grinding sanding polishing abrasive constant force actuator is widely used in nowadays industrial production. Our Force Control System is different from traditional Grinder. Our active contact flange is not single grinder, it has many advantages: flexible control, quick response, instant adjusting. Current market grinder can not realize flexible control. It will reduce the yield rate a lot. Grinding force control system, sanding constant force actuator, polishing active contact flange, abrasive constant force actuator DARU Technology (Suzhou) Co., Ltd. , https://www.darudfc.com
Principle: The material is evenly laid on the filter belt by the distributor. After several “S†shaped press rolls press, misalign, and shear the material, the material removes most of the intercellular water and is discharged from the rear. .
Main features: The material from the incoming to the outgoing, continuous operation has a high degree of automation. Pneumatic tensioning and automatic correcting device are used to ensure the normal operation of the filter belt. According to different materials, filter belts with different structures are configured to have high filtration accuracy. The flushing device can be set according to requirements to ensure the dewatering effect of the filter belt. According to the requirements, it can be equipped with a concentration pretreatment device to increase production efficiency. Large production, stable operation, low noise, good dewatering effect and energy saving.
The pressing machine introduced this time is a new type of machine developed on the basis of the introduction of foreign advanced technology in Changzhou Jinling Drying. The design of this machine is more rational, and the performance and use effect are good. For example, take the wine trough as an example: take off the same amount of water, mechanical dehydration and dryer compared: electricity 1:12, covers an area of ​​1:10, equipment investment 1:4. Mainly used in the dehydration of distilleries, marigolds, sludge, printing and dyeing, papermaking, food, chemical and other industries.