Model NO.: TSD1651/TSQ2147X
HP/Kw: 37kw*2
Capacity: 5-10t/H
Voltage: as Per Customer Request
Blade Thickness: 40mm-75mm
Blade Diameter: 542mm
Cutting Chamber L*W: 1304*858
Equipment Weight: 12500kg
Hopper Opening: 2335*1628*770
Product Size Range: 75mm Strips-40mm Chips
Equipment Dimensions L*W*H: 4280*2206*2492
Trademark: Dure-shred
Specification: 37KW*2
Origin: Wuxi, China
HS Code: 4001100000
Model NO.: TSD1651/TSQ2147X
HP/Kw: 37kw*2
Capacity: 5-10t/H
Voltage: as Per Customer Request
Blade Thickness: 40mm-75mm
Blade Diameter: 542mm
Cutting Chamber L*W: 1304*858
Equipment Weight: 12500kg
Hopper Opening: 2335*1628*770
Product Size Range: 75mm Strips-40mm Chips
Equipment Dimensions L*W*H: 4280*2206*2492
Trademark: Dure-shred
Specification: 37KW*2
Origin: Wuxi, China
HS Code: 4001100000
Welcome to Dura-shred company and thank you for your interests in the products:Dura-shred lower investment higher profit crusher for e-waste.
-Waste recycling plant
The E-Waste recycling line can disassemble and process all kinds of circuit boards, computer board, TV board, aluminum-plastic plate, with copper, printed circuit board. It can process about 2tons of input per hour.This system realizes whole-process PLC control and dynamic realtime monitoring. Characteristics such as low energy consumption, large processing capacity, good economical benefit, small maintenance cost and good processing effect are possessed. For more information, please visit our website;www.dura-shred.cn or: http://dura-shred.en.alibaba.com. Followings are some brief introduction of our main machines:

shredder
       Whole electronic scrap will be input into the dedicated double shaft shredder.  The machine will shred the scrap into strips/pieces of various sizes in the range of 2 cm up to 30 cm which are output on a conveyor and sent to the magnetic separation machine.

Magnet machine
It is utilized to conduct material separation treatment of iron content ferrous metal.
Ferrous materials will be attracted to the magnet and output into a collection box.

eddy current separator
The eddy current separator is used to extract the last remaining non-ferrous metals from the plastic stream, completing the recycling process. This field diverts the non-ferrous metals to be collected, leaving behind only pure plastic.

Dust removal system
harmless treatment is conducted by adopting centralized dust removal method and active carbon filter to filtrate the air, to make the workshop clean and tidy.

Feature
You can see the characteristics and equipment specifications in the forms below.

Competitive advantage of Dura-shred
1,It's designed, scaled, powered, installed, and priced in a way that makes the most sense for your needs.
2,It is in low price.
3,The machine is high output.
4,Strong structure, easy to operate, low electricity consumption & durable.
5,Uses high quality steel material especially for making knives of the shredder, the machine stands long use under severe and continuous service conditions.
6,we have a turnkey service to guarantee your profits and rights.


Company profile
Dura-Shred has been focusing on designing and manufacturing equipment for the recycling industry since 2001 and is emerging as a leader in providing cost effective turnkey tire recycling systems. Our main focus is to provide custom designed tire recycling systems that deliver optimum production for a variety of applications such as TDF (Tire Derived Fuel), rubber mulch, and crumb rubber. We have manufactured and installed recycling systems in countries all over the world, including the US, Canada, Mexico, South America, South Africa, Iraq, and China. These systems are specifically designed and tailored to fit the diverse needs of our global customers.


Our service
1.Pre-sale support
Dura-shred consists of experienced specialists, we will offer a suitable solution according your requirements in time.
2. After-sale service
Dura-shred skilled specialists are available to assist with onsite installation, commissioning & training on request. This will enable customers to optimize the performance of the plant. Customers will be briefed on all aspects relating to operation and maintenance by a specialist. Dimensional drawings together with service requirements will be provided prior to delivery of the equipment. This will allow the customer to prepare the site and allow them to commence production in a timely fashion.
Dura-shred holds a adequately inventory of spare parts and their efficient service personnel will ensure that any required part will be dispatched without delay. Customers are encouraged to hold their own critical spare parts to ensure optimal machine condition and performance.
3. Technical support
Dura-shred provides enough hardware resource no matter large-scale or small-scale production lines, clients can carry out installation, commissioning and acceptance before delivery.
You may be interested in those following questions:
1, I want to know more about your company and your products, how?
Answer: We will sent you a catalogue as well as a questionnaire which covers your requirement. Your kindly reply about filling the questionnaire will be greatly appreciated.
2, Have you ever sold your plant to our country?
Answer: Until now, Our products have been sold to the countries all over the world, such as America, Italy, Poland, India, south Africa, Japan, Pakistan, Columbia and so on.....
3, What is the delivery time?
Answer: it depends on what kind of machine you will buy, usually 2-4 months.
4, Can I go to your company to test those machines?
Answer: We welcome you at any time!!!
5,About our factory, where are we?
Our production plant is located in Wuxi, China, with headquarters in Shanghai, China. We have a modernized factory with an experienced professional work force. Our management team comprises of multi-culture and bi-lingual professionals fluent in English, Spanish, and Mandarin Chinese. Dura-Shred has a turnkey service that allows us to export to all major international ports.

We are almost working for 20 hours, so don't worry about the time difference. You can contact us by email ,Trade manager, Skype, Whatsapp or Phone. We can handle all that.
My connections: Mr.Charles Huang
Cel: 0086-189-3994-5932
Tel: 0086-021-5171-9519


 
TSD2471(182) TSD1663(137) TSD1651 TSD1347(86) TSD1340 TSD1332 TSD832
Motor Specifications Electric Electric Electric Electric Electric Electric Electric
Number of Motors 2 2 2 2 2 2 2
HP 55KWX2 45KWX2 37KWX2 22KWX2 22KWX2 15KWX2 7.5KWX2
Voltage as per customer request as per customer request as per customer request as per customer request as per customer request as per customer request as per customer request
Cutting Chamber Split Chamber Split Chamber Split Chamber intact Chamber intact Chamber intact Chamber intact Chamber
Large Blade Thickness 75mm 75mm 75mm 40mm 40mm 40mm 40mm
Small Blade Thickness 40mm 40mm 40mm / / / /
Blade Diameter 754mm 542mm 542mm 450mm 450mm 450mm 284mm
Cutting Chamber L*W 1804X1410 1604X858 1304X858 1204X686 1004x686 804x686 804x460
Equipment Dimensions 5876x2310x3493 5464x2624x3040 4280x2206x2492 4092x1416x2163 3892x1416x2163 3327x1030x2075 2796x1256x2311
Equipment Weight 22400kg 13700kg 12500kg 6300kg 5800kg 4700kg 2000kg
Hopper Opening 3711x2438x1046 2835x1628x770 2335x1628x770 1521x1416x695 1321x1416x695 1120x1257x800 1120x1256x800
Capacity 15-20t/h 10-15t/h 5-10t/h 3-5t/h 2-3t/h 1-2t/h 800-1000kg/h
Product Size Range 40mm-75mm 40mm-75mm 40mm-75mm 40mm chips 40mm chips 40mm chips 40mm chips
 

 
TSQ2147X TSQ1740X TSQ1732X
Motor Specifications Electric Electric Electric
Number of Motors 1 1 1
HP 90KW 45KW 37KW
Voltage as per customer request as per customer request as per customer request
Cutting Chamber LxW 742x1200 580x1000 580x800
Equipment Dimensions LxWxH 2150x2250x2950 1765x1900x2435 1765x1660x2435
Equipment Weight 5600kg 3300kg 2950kg
Hopper Opening LxWxH 895x1434x1160 602x994x916 602x794x916
Capacity 800-1500kg/h 500-800kg/h 300-500kg/h
Product Size Range 1mm-6mm 1mm-6mm 1mm-6mm
Any other requirements or questions about our Dura-shred lower investment higher profit crusher for e-waste,be free to contact me! Welcome to Dura-shred company and thank you for your interests in the products:Dura-shred lower investment higher profit crusher for e-waste.
-Waste recycling plant
The E-Waste recycling line can disassemble and process all kinds of circuit boards, computer board, TV board, aluminum-plastic plate, with copper, printed circuit board. It can process about 2tons of input per hour.This system realizes whole-process PLC control and dynamic realtime monitoring. Characteristics such as low energy consumption, large processing capacity, good economical benefit, small maintenance cost and good processing effect are possessed. For more information, please visit our website;www.dura-shred.cn or: http://dura-shred.en.alibaba.com. Followings are some brief introduction of our main machines:

shredder
       Whole electronic scrap will be input into the dedicated double shaft shredder.  The machine will shred the scrap into strips/pieces of various sizes in the range of 2 cm up to 30 cm which are output on a conveyor and sent to the magnetic separation machine.

Magnet machine
It is utilized to conduct material separation treatment of iron content ferrous metal.
Ferrous materials will be attracted to the magnet and output into a collection box.

eddy current separator
The eddy current separator is used to extract the last remaining non-ferrous metals from the plastic stream, completing the recycling process. This field diverts the non-ferrous metals to be collected, leaving behind only pure plastic.

Dust removal system
harmless treatment is conducted by adopting centralized dust removal method and active carbon filter to filtrate the air, to make the workshop clean and tidy.

Feature
You can see the characteristics and equipment specifications in the forms below.

Competitive advantage of Dura-shred
1,It's designed, scaled, powered, installed, and priced in a way that makes the most sense for your needs.
2,It is in low price.
3,The machine is high output.
4,Strong structure, easy to operate, low electricity consumption & durable.
5,Uses high quality steel material especially for making knives of the shredder, the machine stands long use under severe and continuous service conditions.
6,we have a turnkey service to guarantee your profits and rights.


Company profile
Dura-Shred has been focusing on designing and manufacturing equipment for the recycling industry since 2001 and is emerging as a leader in providing cost effective turnkey tire recycling systems. Our main focus is to provide custom designed tire recycling systems that deliver optimum production for a variety of applications such as TDF (Tire Derived Fuel), rubber mulch, and crumb rubber. We have manufactured and installed recycling systems in countries all over the world, including the US, Canada, Mexico, South America, South Africa, Iraq, and China. These systems are specifically designed and tailored to fit the diverse needs of our global customers.


Our service
1.Pre-sale support
Dura-shred consists of experienced specialists, we will offer a suitable solution according your requirements in time.
2. After-sale service
Dura-shred skilled specialists are available to assist with onsite installation, commissioning & training on request. This will enable customers to optimize the performance of the plant. Customers will be briefed on all aspects relating to operation and maintenance by a specialist. Dimensional drawings together with service requirements will be provided prior to delivery of the equipment. This will allow the customer to prepare the site and allow them to commence production in a timely fashion.
Dura-shred holds a adequately inventory of spare parts and their efficient service personnel will ensure that any required part will be dispatched without delay. Customers are encouraged to hold their own critical spare parts to ensure optimal machine condition and performance.
3. Technical support
Dura-shred provides enough hardware resource no matter large-scale or small-scale production lines, clients can carry out installation, commissioning and acceptance before delivery.
You may be interested in those following questions:
1, I want to know more about your company and your products, how?
Answer: We will sent you a catalogue as well as a questionnaire which covers your requirement. Your kindly reply about filling the questionnaire will be greatly appreciated.
2, Have you ever sold your plant to our country?
Answer: Until now, Our products have been sold to the countries all over the world, such as America, Italy, Poland, India, south Africa, Japan, Pakistan, Columbia and so on.....
3, What is the delivery time?
Answer: it depends on what kind of machine you will buy, usually 2-4 months.
4, Can I go to your company to test those machines?
Answer: We welcome you at any time!!!
5,About our factory, where are we?
Our production plant is located in Wuxi, China, with headquarters in Shanghai, China. We have a modernized factory with an experienced professional work force. Our management team comprises of multi-culture and bi-lingual professionals fluent in English, Spanish, and Mandarin Chinese. Dura-Shred has a turnkey service that allows us to export to all major international ports.

We are almost working for 20 hours, so don't worry about the time difference. You can contact us by email ,Trade manager, Skype, Whatsapp or Phone. We can handle all that.
My connections: Mr.Charles Huang
Cel: 0086-189-3994-5932
Tel: 0086-021-5171-9519


 
TSD2471(182) TSD1663(137) TSD1651 TSD1347(86) TSD1340 TSD1332 TSD832
Motor Specifications Electric Electric Electric Electric Electric Electric Electric
Number of Motors 2 2 2 2 2 2 2
HP 55KWX2 45KWX2 37KWX2 22KWX2 22KWX2 15KWX2 7.5KWX2
Voltage as per customer request as per customer request as per customer request as per customer request as per customer request as per customer request as per customer request
Cutting Chamber Split Chamber Split Chamber Split Chamber intact Chamber intact Chamber intact Chamber intact Chamber
Large Blade Thickness 75mm 75mm 75mm 40mm 40mm 40mm 40mm
Small Blade Thickness 40mm 40mm 40mm / / / /
Blade Diameter 754mm 542mm 542mm 450mm 450mm 450mm 284mm
Cutting Chamber L*W 1804X1410 1604X858 1304X858 1204X686 1004x686 804x686 804x460
Equipment Dimensions 5876x2310x3493 5464x2624x3040 4280x2206x2492 4092x1416x2163 3892x1416x2163 3327x1030x2075 2796x1256x2311
Equipment Weight 22400kg 13700kg 12500kg 6300kg 5800kg 4700kg 2000kg
Hopper Opening 3711x2438x1046 2835x1628x770 2335x1628x770 1521x1416x695 1321x1416x695 1120x1257x800 1120x1256x800
Capacity 15-20t/h 10-15t/h 5-10t/h 3-5t/h 2-3t/h 1-2t/h 800-1000kg/h
Product Size Range 40mm-75mm 40mm-75mm 40mm-75mm 40mm chips 40mm chips 40mm chips 40mm chips
 

 
TSQ2147X TSQ1740X TSQ1732X
Motor Specifications Electric Electric Electric
Number of Motors 1 1 1
HP 90KW 45KW 37KW
Voltage as per customer request as per customer request as per customer request
Cutting Chamber LxW 742x1200 580x1000 580x800
Equipment Dimensions LxWxH 2150x2250x2950 1765x1900x2435 1765x1660x2435
Equipment Weight 5600kg 3300kg 2950kg
Hopper Opening LxWxH 895x1434x1160 602x994x916 602x794x916
Capacity 800-1500kg/h 500-800kg/h 300-500kg/h
Product Size Range 1mm-6mm 1mm-6mm 1mm-6mm
Any other requirements or questions about our Dura-shred lower investment higher profit crusher for e-waste,be free to contact me!

sandpaper replacement device is very helpful to Modular grinding station. It can ensure grinding table non-stop running. Big scale producing is available with the help of sandpaper exchange equipment. It is universal used to any brand grinding equipment. So its market will be very wide. It can also help realize automation mass production. 

Automatic Sandpaper replacement Equipment

Sandpaper replacement equipment, sandpaper exchange device, sandpaper exchange machine, sandpaper replacement device

DARU Technology (Suzhou) Co., Ltd. , https://www.daruacf.com