Model NO.: BMM/OMM/MM
Trademark: HANJIU
Transport Package: 1 PC/ Inner Carton
Specification: 15x15x10cm
Origin: China
HS Code: 8412299090
Model NO.: BMM/OMM/MM
Trademark: HANJIU
Transport Package: 1 PC/ Inner Carton
Specification: 15x15x10cm
Origin: China
HS Code: 8412299090

16mm Cylindrical Shaft BMM Hydraulic Motor with Side Ports G1/2

 

Introduction:
A hydraulic motor is an actuator of a hydraulic system that converts hydraulic pressure energy supplied by a hydraulic pump into the mechanical energy (torque and speed) of its output shaft. Liquid is the medium that transmits force and movement.

Hydraulic motors, also known as oil motors, are mainly used in injection molding machinery, ships, hoists, construction machinery, construction machinery, coal mining machinery, mining machinery, metallurgical machinery, shipbuilding machinery, petrochemicals, and port machinery.


 

Characteristic features od BMM:

• Smooth running over the entire speed range

• Constant operating torque over a wide speed range

• High starting torque

• High return pressure without the use of drain line (High pressure shaft seal)

• High efficiency

• Long life under extreme operating conditions

 

Model Crossing:

 

MOTOR CROSS REFERENCE TABLE
 
HANJIU
HYDRAULIC
M+S
HYDRAULIC
EATON
CHAR LYNN
DANFOSS ROSS
TRW
WHITE
CROSS
PARKER SAM
BREVINI
BOSCH
RECROTH
BMM MM MLHK J SERIES OMM       BGM MGX
 

 

16mm Cylindrical Shaft
Geometric displacement 40 cm³
• speed continuous. 630 min-1
• speed intermittent.¹ 800 rpm
• torque continuous. 40 Nm
• torque intermittent.¹ 57 Nm
• output continuous. 2.4 kW
• output intermittent.¹ 3.2 kW
• pressure continuous. 100 bar
• pressure intermittent.¹ 140 bar
• pressure peak² 160 bar

 

Main Specifications:

 

type BMM8 BMM12 BMM20 BMM32 BMM40 BMM50
displacement 8.2 12.9 19.9 31.6 39.8 50.3
Max speed(rpm) rated 1537 1256 814 513 452 358
Cont. 1950 1550 1000 630 500 400
int. 2450 1940 1250 800 630 500
Max Torque
(N*M)
rated 8 13 19 31 37 33
Cont. 11 16 25 40 45 46
int. 15 23 35 57 70 88
peak 21 33 51 64 82 100
Max speed
(kw)
rated 1.3 1.7 1.7 1.7 1.7 1.2
Cont. 1.8 2.4 2.4 2.4 2.2 1.8
int. 2.6 3.2 3.2 3.2 3.2 3.2
Max pressure
drop(MPa)
rated 9 9 9 9 8.5 6
Cont. 10 10 10 10 9 7
int. 14 14 14 14 14 14
peak 20 20 20 16 16 16
Max flow(L/min) rated 14 18 18 18 20 20
Cont. 18 20 20 20 20 20
int. 20 25 25 25 25 25
Weight(kg) 1.9 2 2.1 2.2 2.3 2.4

 

Type   Max.inlet pressure
BMM8-50 Cont. 17.5
(Mpa) Int. 22.5




High Speed Hydraulic Motor Bmm 20cc Used for Under Water Propeller Polishing Device
 

Shijiazhuang Hanjiu Technology Co.,Ltd
A hydraulic motor, which is an actuator of a hydraulic system, converts hydraulic pressure energy supplied by a hydraulic pump into the mechanical energy (torque and rotational speed) of its output shaft. Hydraulic motors, also known as oil motors, are mainly used in injection molding machinery, ships, hoists, construction machinery, construction machinery, coal mining machinery, mining machinery, metallurgical machinery, shipbuilding machinery, petrochemicals, and port machinery.

• Cone Splitter

• Excavator Splitter

• Drilling Machine

• Mining Equipment

• Geological exploration
High Speed Hydraulic Motor Bmm 20cc Used for Under Water Propeller Polishing Device
Shijiazhuang Hanjiu Technology Co., Ltd. is a professional manufacturer of BM series cycloidal hydraulic motors and BZZ steering gears. Our factory has dozens of highly qualified and professional engineers and technicians, and introduced many advanced machines in 2010. The production facilities are large-scale factories in northern China and produce more than 300,000 units each year.
  Our factory specializes in designing and producing any type of motor and steering gear required by our customers, from large to small, from low to high displacement. And can replace Danfoss, Eaton, M + S series models. Products are widely used in engineering machinery, mining machinery, metallurgical machinery, petroleum machinery, agricultural machinery, injection molding machinery, fishery machinery, military engineering and other fields.
  My factory takes honesty first and quality first as its tenet. From the employees' posts to the raw materials, to the factory, from parts processing and assembly advice to product leaving, there is a relatively complete product quality system. And passed CE certification. Our factory is committed to establishing an internationally renowned brand and looks forward to long-term cooperation with more demanders of hydraulic products.


High Speed Hydraulic Motor Bmm 20cc Used for Under Water Propeller Polishing Device
High Speed Hydraulic Motor Bmm 20cc Used for Under Water Propeller Polishing Device

Please do not hesitate to contact us for further information, inquiries or orders.

Thank you for choosing 'Hanjiu' Hydraulics.



 

Shijiazhuang Hanjiu Technology Co.,Ltd
HANHAN
 
Website: http://www.hjhydraulic.com
 

16mm Cylindrical Shaft BMM Hydraulic Motor with Side Ports G1/2

 

Introduction:
A hydraulic motor is an actuator of a hydraulic system that converts hydraulic pressure energy supplied by a hydraulic pump into the mechanical energy (torque and speed) of its output shaft. Liquid is the medium that transmits force and movement.

Hydraulic motors, also known as oil motors, are mainly used in injection molding machinery, ships, hoists, construction machinery, construction machinery, coal mining machinery, mining machinery, metallurgical machinery, shipbuilding machinery, petrochemicals, and port machinery.


 

Characteristic features od BMM:

• Smooth running over the entire speed range

• Constant operating torque over a wide speed range

• High starting torque

• High return pressure without the use of drain line (High pressure shaft seal)

• High efficiency

• Long life under extreme operating conditions

 

Model Crossing:

 

MOTOR CROSS REFERENCE TABLE
 
HANJIU
HYDRAULIC
M+S
HYDRAULIC
EATON
CHAR LYNN
DANFOSS ROSS
TRW
WHITE
CROSS
PARKER SAM
BREVINI
BOSCH
RECROTH
BMM MM MLHK J SERIES OMM       BGM MGX
 

 

16mm Cylindrical Shaft
Geometric displacement 40 cm³
• speed continuous. 630 min-1
• speed intermittent.¹ 800 rpm
• torque continuous. 40 Nm
• torque intermittent.¹ 57 Nm
• output continuous. 2.4 kW
• output intermittent.¹ 3.2 kW
• pressure continuous. 100 bar
• pressure intermittent.¹ 140 bar
• pressure peak² 160 bar

 

Main Specifications:

 

type BMM8 BMM12 BMM20 BMM32 BMM40 BMM50
displacement 8.2 12.9 19.9 31.6 39.8 50.3
Max speed(rpm) rated 1537 1256 814 513 452 358
Cont. 1950 1550 1000 630 500 400
int. 2450 1940 1250 800 630 500
Max Torque
(N*M)
rated 8 13 19 31 37 33
Cont. 11 16 25 40 45 46
int. 15 23 35 57 70 88
peak 21 33 51 64 82 100
Max speed
(kw)
rated 1.3 1.7 1.7 1.7 1.7 1.2
Cont. 1.8 2.4 2.4 2.4 2.2 1.8
int. 2.6 3.2 3.2 3.2 3.2 3.2
Max pressure
drop(MPa)
rated 9 9 9 9 8.5 6
Cont. 10 10 10 10 9 7
int. 14 14 14 14 14 14
peak 20 20 20 16 16 16
Max flow(L/min) rated 14 18 18 18 20 20
Cont. 18 20 20 20 20 20
int. 20 25 25 25 25 25
Weight(kg) 1.9 2 2.1 2.2 2.3 2.4

 

Type   Max.inlet pressure
BMM8-50 Cont. 17.5
(Mpa) Int. 22.5




High Speed Hydraulic Motor Bmm 20cc Used for Under Water Propeller Polishing Device
 

Shijiazhuang Hanjiu Technology Co.,Ltd
A hydraulic motor, which is an actuator of a hydraulic system, converts hydraulic pressure energy supplied by a hydraulic pump into the mechanical energy (torque and rotational speed) of its output shaft. Hydraulic motors, also known as oil motors, are mainly used in injection molding machinery, ships, hoists, construction machinery, construction machinery, coal mining machinery, mining machinery, metallurgical machinery, shipbuilding machinery, petrochemicals, and port machinery.

• Cone Splitter

• Excavator Splitter

• Drilling Machine

• Mining Equipment

• Geological exploration
High Speed Hydraulic Motor Bmm 20cc Used for Under Water Propeller Polishing Device
Shijiazhuang Hanjiu Technology Co., Ltd. is a professional manufacturer of BM series cycloidal hydraulic motors and BZZ steering gears. Our factory has dozens of highly qualified and professional engineers and technicians, and introduced many advanced machines in 2010. The production facilities are large-scale factories in northern China and produce more than 300,000 units each year.
  Our factory specializes in designing and producing any type of motor and steering gear required by our customers, from large to small, from low to high displacement. And can replace Danfoss, Eaton, M + S series models. Products are widely used in engineering machinery, mining machinery, metallurgical machinery, petroleum machinery, agricultural machinery, injection molding machinery, fishery machinery, military engineering and other fields.
  My factory takes honesty first and quality first as its tenet. From the employees' posts to the raw materials, to the factory, from parts processing and assembly advice to product leaving, there is a relatively complete product quality system. And passed CE certification. Our factory is committed to establishing an internationally renowned brand and looks forward to long-term cooperation with more demanders of hydraulic products.


High Speed Hydraulic Motor Bmm 20cc Used for Under Water Propeller Polishing Device
High Speed Hydraulic Motor Bmm 20cc Used for Under Water Propeller Polishing Device

Please do not hesitate to contact us for further information, inquiries or orders.

Thank you for choosing 'Hanjiu' Hydraulics.



 

Shijiazhuang Hanjiu Technology Co.,Ltd
HANHAN
 
Website: http://www.hjhydraulic.com
 

Maize Sheller

Maize Peeling Machine,Maize Shelling Machine,Maize Thresher,Maize Thresher Machine

Shuangfeng Nongjiabao Machinery Technology Co., Ltd , https://www.starchmachine.nl