-
Model NO.: SRL
-
Working: High Speed Mixer
-
Application: Powder
-
Application Area: Rubber,Food-Stuff,Daily Chemical Industry
-
Additional Capabilities: Drying
-
Condition: New
-
Working Way: Hot Mixing and Cooling Mixing
-
Heating Method: Self-Friction and Electricy Steam
-
Discharge Method: Pneumatics or by Hand Works
-
Specification: CE, SGS, ISO
-
HS Code: 84743900
-
Mixer Type: Agitator
-
Stirring Type: Spiral
-
Certification: CE, ISO
-
Layout Type: Verticle
-
Operating type: Cycle Operating
-
Series: SRL
-
Usage: for Mixing Plastics,Rubbers,Food-Stuff etc
-
Cooling Way: Water Cooling
-
Brands of Important Parts: Holip,Siemens,Chnt etc
-
Origin: Jiangsu, China
SRLSeries powder mixer for plastic extruder units are widely used for mixing, drying, and coloring for all kinds of plastic resin such as PVC , PE, PP. They can also be applied in drying of engineering plastic such as, ABS, PC, etc. This unit is composed of heating and cooling mixers. Hot material from heating mixer is fed into cooling mixer for cooling to eliminate gas and avoid burning.
| Main Technical Parameter |
| Model |
SRL-Z100/200 |
SRL-Z200/500 |
SRL-Z300/600 |
SRL-Z500/1250 |
SRL-Z800/1600 |
| Total volume (L) |
100/200 |
200/500 |
300/600 |
500/1250 |
800/1600 |
| Effective capacity (L) |
65/130 |
150/320 |
225/380 |
330/750 |
600/1050 |
| Stirring speed (rpm) |
650/1300/200 |
475/950/130 |
475/950/100 |
430/860/70 |
370/740/50 |
| MIxing time (min.) |
8-12 |
8-12 |
8-12 |
8-12 |
8-12 |
| Motor power (kw) |
14/22/7.5 |
30/42/11 |
40/55/11 |
55/75/15 |
83/110/22 |
| Ovarall dimension (mm) |
1950*1600*1800 |
4580*2240*2470 |
4800*2640*2480 |
5600&3000*3100 |
5170*3200*4480 |
| Weight (kg) |
2200 |
3400 |
3600 |
6500 |
9800 |
| Output (kg/h) |
165 |
330 |
495 |
825 |
1320 |
|
Auto Parts (auto parts) constitute the overall unit of the car and serve a car in a product.
With the increasingly fierce competition in the auto parts processing
market, the concept of environmental protection enjoys popular support,
and the continuous upgrading and application of technology, the
international auto parts processing parts industry in recent years has
shown the following characteristics:
â‘ auto parts processing system support, modular supply trend in the ascendant
â‘¡ global processing of auto parts procurement
â‘¢ auto parts processing industry to accelerate the transfer speed [1]
A wide range of auto parts, the brand is now more and more cars, more and more types of cars. Car
can be divided into two kinds of passenger cars and commercial
vehicles, including passenger car seat is less than nine seats
(including the driver's seat) to the main purpose of the vehicle. Specifically, the passenger car is divided into basic passenger cars,
cars, MPV models, SUV models and other models such as pickup and so on.
A commercial vehicle is a vehicle with more than nine seats (including driver's seat) or a main purpose of loading. Specifically divided into: passenger cars, trucks, semi-trailer, bus non-complete vehicles, cargo non-complete vehicles.
With
the improvement of people's living standards, people's consumption of
cars is also increasing, the auto parts market has become more and more. In recent years, auto parts manufacturers are also rapid development.
Auto Parts
Auto Die Casting Parts,Auto Engine Cylinder Part,Aluminum Auto Casting Part,Aluminum Enclosure Box
Ningbo Beilun Huari Metal Products Co., Ltd. , http://www.huari-metal.com