2,Output tested: 25.6V         regulator voltage set point: 28.5 ± 0.3 V 3,Rotation: CW 4,Package: NO. 15 Cartons (26cm*19cm*17.5cm) 5,Net Weight: 6.27 KG 2,Output tested: 25.6V         regulator voltage set point: 28.5 ± 0.3 V 3,Rotation: CW 4,Package: NO. 15 Cartons (26cm*19cm*17.5cm) 5,Net Weight: 6.27 KG
The Chinese spare truck parts cover all the exported serial truk parts. Our main product cover: BEIBEN/HUALING/Genlyon/CAMC/JMC/JAC/YUEJIN/DFLZ and etc. We can provide you the realiable quality and best price truck parts to maintance your after market service. Our main product:
- cabin assy and cabin accessory; Headlamp, taillamp, bumper, front cover, door and glass;
- Chassis Parts; sun gear, brake pad, clutch plate, bearing, differential, PTO, and axle;
- transmission parts; transmission shaft, universal joint, steering pump, clutch booster and brake pedal;
- Engine Parts; cylinder liner, piston, piston ring, oil seal, connection rod bearing, starter, injection pump, oil pump, water pump, air filter, oil filter and fuel filter;
- other spare parts. Curtain, roof, water tank, radiator, inter cooler and ect.
Chinese Heavy Truck Parts,Heavy Duty Truck Parts,Medium Duty Truck Parts,Heavy Duty Truck Jinan JF Co., Ltd , https://www.jfsinotruk.com
Voltage
24
Amperage
35
Pulley Type
Fixed
Pulley Grooves
1
Pulley Diameter (mm)
82
Note 1
With vac pump
Note 5
Nissan
OEM
REFERENCE
Â
MITSUBISHI
A003TN5082
Â
MITSUBISHI
A3TN5082
Â
NISSAN
231000T060
 Â
  We control the raw material with strict standard, especially for the copper wire. We use 10# steel and good magnet materials.
Production Equipment:
The armature and stator are produced by automatic equipment.
Inspection equipment:
We have more than 60 quality inspection equipment. We can inspect all items according to starter GB standard and analyze the quality differences.
Armature, stator, solenoid switch and the starter assembly are all 100% inspected.
Whole set laboratory equipment:
We have whole set laboratory equipment for the starter performance test.
Market share:
We are No 1 for single cylinder diesel engine starter production in China. The annual selling quantity is more than 400000 sets.
Experiences:
Plentiful Experience to ensure quality
Most of our workers are with more than 10 years even 20 years experiences.
Our R&D engineers are also with more than 20 years experiences.
9.  After-sales service:
Good and fast response for after- sale Services
Once we receive quality problems complaint, we will reply customer within 5 hours, if domestic customers, we our engineers will go to solve the problem in the spot as quick as possible.
Competitive price ------
Over 90% parts produced by our own factory
Regular Starters, Next Day Delivery.
Save Money Repair it, Do not replace it.
1 year warranty
100% brand new product
  Â
Major product family:Â
    Alt: CS, AD, ND, Ford, SI, Leece Neville, Marelli, Bosch, Valeo, Mitsubishi, Lucas, etc.
    Str: Ford PMGR, PG260D/G/L/F1/F2/M, Bosch, Valeo, Mitsubishi, etc.
 Market (%):Â
     North America 60%; Middle East 15%; Europe 15%; Local 10%.
 We are specialized in Auto alternator and starter motor since 2000. Quality first, price second. Usually, our alternator and starter motor can match with each other smoothly in the same model Vehicle.
Â
Our company boasts a high-quality management team from top to bottom for the purpose of an efficient operation system. We control every part and every working procedure strictly because we regard product quality as a basis of our corporate development. Based on the original ISO9001: 2000 International Quality Management System, all links of our production and management are strictly guided by the standard of ISO/TS16949
Â
1, Unit output power:24V    35A
Voltage
24
Amperage
35
Pulley Type
Fixed
Pulley Grooves
1
Pulley Diameter (mm)
82
Note 1
With vac pump
Note 5
Nissan
OEM
REFERENCE
Â
MITSUBISHI
A003TN5082
Â
MITSUBISHI
A3TN5082
Â
NISSAN
231000T060
 Â
  We control the raw material with strict standard, especially for the copper wire. We use 10# steel and good magnet materials.
Production Equipment:
The armature and stator are produced by automatic equipment.
Inspection equipment:
We have more than 60 quality inspection equipment. We can inspect all items according to starter GB standard and analyze the quality differences.
Armature, stator, solenoid switch and the starter assembly are all 100% inspected.
Whole set laboratory equipment:
We have whole set laboratory equipment for the starter performance test.
Market share:
We are No 1 for single cylinder diesel engine starter production in China. The annual selling quantity is more than 400000 sets.
Experiences:
Plentiful Experience to ensure quality
Most of our workers are with more than 10 years even 20 years experiences.
Our R&D engineers are also with more than 20 years experiences.
9.  After-sales service:
Good and fast response for after- sale Services
Once we receive quality problems complaint, we will reply customer within 5 hours, if domestic customers, we our engineers will go to solve the problem in the spot as quick as possible.
Competitive price ------
Over 90% parts produced by our own factory
Regular Starters, Next Day Delivery.
Save Money Repair it, Do not replace it.
1 year warranty
100% brand new product
  Â
Major product family:Â
    Alt: CS, AD, ND, Ford, SI, Leece Neville, Marelli, Bosch, Valeo, Mitsubishi, Lucas, etc.
    Str: Ford PMGR, PG260D/G/L/F1/F2/M, Bosch, Valeo, Mitsubishi, etc.
 Market (%):Â
     North America 60%; Middle East 15%; Europe 15%; Local 10%.
 We are specialized in Auto alternator and starter motor since 2000. Quality first, price second. Usually, our alternator and starter motor can match with each other smoothly in the same model Vehicle.
Â
Our company boasts a high-quality management team from top to bottom for the purpose of an efficient operation system. We control every part and every working procedure strictly because we regard product quality as a basis of our corporate development. Based on the original ISO9001: 2000 International Quality Management System, all links of our production and management are strictly guided by the standard of ISO/TS16949
Â
Model NO.: A3TN5082
Voltage Adjuster Type: Electromagnetic Vibratory
Voltage: 24V
Head Cover Position: Front
Brand: Mitsubishi
Alternator: 24V 35A
Mfr: Mitsubish
Pulley Grooves: 1
Pulley Diameter (mm): 82
Note 1: with VAC Pump
Note: Nissan
Trademark: ATL
Specification: Alternator 24V 35A
Origin: Zhengjiang
HS Code: 87081000
Model NO.: A3TN5082
Voltage Adjuster Type: Electromagnetic Vibratory
Voltage: 24V
Head Cover Position: Front
Brand: Mitsubishi
Alternator: 24V 35A
Mfr: Mitsubish
Pulley Grooves: 1
Pulley Diameter (mm): 82
Note 1: with VAC Pump
Note: Nissan
Trademark: ATL
Specification: Alternator 24V 35A
Origin: Zhengjiang
HS Code: 87081000
1, Unit output power:24V    35A