Applications:
As the Domestic Water is being heated, it is being drawn up the center of the water to water heat exchanger by convection, Both fluids are exchanger heat in separate chambers insuring that the two fluids do not mix This convection process is constantly working as long as the boiler system is circulating the preheated water through the jacket of the Side Arm heat exchanger.
By applying the fin shower save the cold water going to the water heater and the shower's mixer tap will be preheated. The water heater needs to work less then half of it's capacity during a shower. For dwellings savings over 200m³ gas a year can be achieved.
Side Arm Tube Heat Exchanger,Side Arm Heat Exchanger,Fin And Tube Heat Exchanger,Waste Water Heat Recovery Heat Exchanger Jiangsu Baode Heat-Exchanger Equipment Co.,LTD , https://www.baodehex.com
Coating
- A: Fusion Bonded Epoxy powder coated
- B: Spray Painting
Butterfly Valve Fields of Application
- Water systems such as water treatment plants, distribution networks, potable water applications;
- Sewage systems such as sewage treatment plants, raw water, digested sewage, air applications;
- Industrial systems such as chemical contaminated waste water, gases, industrial media
- Food & Beverage systems such as washing and rinsing applications, conveying systems, potable water processing.
INSPECTION:
PACKAGE:
CERTIFICATE:
Please contact us for more information!
Contact person: Joe Zhao
Outdoor wood boiler domestic hot water tie in Boiler tie into domestic hot water
Solar thermal heat dump to domestic hot water
The Fin Enhanced side arm heat exchanger, using a fin design adds more surface area giving us an surface area five to eight times larger than traditional tube & shell side arms.
Fin Enhanced Advantages:
Highly Efficient Better Heat Transfer
Takes up less space due to compact design Faster recovery time
Made from stainless steel
The fin sidearm shower save can be used in dwellings that have the shower on the first floor.
Besides dwellings the Fin sidearm shower save can also be used in hotels, apartments, nursing homes, swimming pools, hospitals, industrial applications, etc.
API609 Butterfly Valve
Item: Butterfly Valve
Technical Data
- Size: DN40-DN1200
- General Design: API609
- Mounting Pad: ISO 5211
- Face to Face Dimension: API609 EN558-1-20 Series
- Flange Drilling: DIN2501 PN10/PN16
- Inspection and Test: API598
- All available General Design and Face to Face Dimension kindly refer to the basic specification of EATHU.
- All available Flange Drilling kindly refer to the attached flange drilling dimensions.
Product Features
- Wafer, lug or U type flanged body style fit between FF or RF flanges
- PTFE bushing ensure the maximum shaft support and centralized alignment
- 360°C polished disc assures positive on-off
- Hard-backed cartridge seat or rubber boot seat
- One piece shaft, double piece shaft, pinned or pinless disc
- Universal ISO5211 mounting pad
Material List
- Body: Cast Iron A126 CLASSE B; Ductile iron GGG40/GGG50
- Bushing: PTFE
- O ring: EPDM
- Shaft: Stainless steel AISI316
- Disc: Stainless steel A351 CF8M
- Seat: EPDM
- Pin: Stainless steel AISI316
Actuator