Most car refrigerators on the market today are semiconductor-refrigerated refrigerators, which use semiconductor electronic refrigeration technology, which does not generate noise and pollution, and has both cooling and heating functions. Just insert the power plug into the cigarette lighter during the journey, and lower the temperature to 2-5 degrees after 2 hours.

In addition to semiconductor refrigerators, there are absorption refrigerators and compressor refrigerators.

Most car refrigerators are just thermostats, and the temperature is usually only about ten degrees. If it is a high-end car standard compressor refrigerator will be much better. However, the car refrigerator has a limitation. After the car's engine stops working, it can only rely on the insulation layer of the refrigerator to maintain the low temperature, and its cooling effect will naturally be greatly reduced.

Car refrigerator introduction:

Semi-conductor car refrigerator, bright colors, small form factor, automotive, home two kinds of power, can provide you with heating and cooling, summer and winter are your good mate.

• As a gift, new and fashionable.

• On weekends and holidays, drive a car to go out on a camp or dinner.

• Get out of the car in summer and get a traffic jam. Drink cold drinks on the car and relieve your irritability.

• White-collar office put a small car refrigerator. In the morning, you can have a hot breakfast while you work. You can also drink cold drinks in the summer. You can bring good soup stew in your home. You can take care of yourself by going to work.

• Have a baby at home and take him (her) out to keep your baby milk warm. Don't worry about not getting warm food.

• Passing supermarkets want to buy some cold drinks and go home. There are portable cooler bags that can be placed on supermarket carts to bring your cold drinks home.

• Single apartment, student apartment, a small car refrigerator, enough for one person to live, dual power car home, convenient and practical.

• A favorite of activists who need ice escorts at all times.

• Beautiful lady's cosmetics, health products and medicines with certain temperature requirements all have their place of use.

Instructions for use 1. Car refrigerator can make people feel cool in the hot summer, but be sure to know its minimum cooling temperature. The other thing to understand is that the car refrigerator is generally very power-consuming.

2, while buying a car refrigerator, you also have to buy a multi-purpose socket, which can ensure that your refrigerator, car lights, hands-free equipment, etc. at the same time.

3, it is best to be equipped with power converters, in order to achieve refrigerator home, car use two correct.

4. When using the car refrigerator, the air inlet should not enter the water as much as possible, or the car refrigerator will strike.

5. Magnetic objects should not be placed in the refrigerator liner to prevent internal cooling chips from being affected.

6. Do not place overheated or corrosive objects in the cabinet to avoid damage to the interior of the cabinet.

7. Switch off the power for 8-10 minutes when switching from one temperature mode to another.

8. When used in a car, remember to cut off the power of the product after turning off the engine.

9. Each section of the refrigerator has an air outlet for heat dissipation. Take care not to block the outlet during installation.

Matters needing attention 1, the use of the car, cigarette lighter access.

2. When switching the cooling function from the heating function, it is recommended to turn off the power and start the car refrigerator after 5 minutes.

3, please always ensure that the car refrigerator vents and cooling holes open.

4, do not stuff into the vehicle refrigerator cooling holes and suction holes, car refrigerator should be used away from heat.

5, clean the car refrigerator, please turn off all power, please do not use strong detergent to clean the refrigerator car refrigerator trend Now many of the world's high-end cars have been used OEM embedded compressor compressor car, this is the real sense of the car Refrigerators, Europe and the United States and Europe, Japan, South Korea, many more professional enthusiasts and the needs of the defense force, has begun to use fully enclosed compressor car refrigerator, the cooling temperature can reach minus 18 degrees, and can control the temperature, large Some refrigerators can use 220 volts/110 volts -12 volts/24 volts and switch automatically. This compressor refrigerator use is a conventional reciprocating compressor and a rotary compressor. Even if the refrigerator is turned upside down, the compressor will not be damaged. The compressor is fully enclosed, non-fluorine, and maintenance-free technology, so that the car refrigerator can operate normally in reverse. Many refrigerators and cross-country races use this type of refrigerator. MOBICOOL brand compressor refrigerators in Europe's northern army and the Middle East army became the standard configuration. The domestic Qianli ice brand is a new compressor car refrigerator, and it is the world's first rotary compressor. It is superior to conventional reciprocating compressors in terms of anti-pitching and tilt angle. Compressor car refrigerators are gradually replacing traditional electronic refrigerators, and the domestic market is gradually accepting the process. It is expected that the domestic market will start within one year.

Now our country’s citizens are beginning to have a keen interest in such products as car refrigerators. Car refrigerators begin to enter our lives in large numbers. Its use can be used in many ways. Such as single staff quarters, frequent moving places. Party, fishing, office or construction site, campground picnic. Poolside banquets, food preservation, and medicine can be used to transport cold medicines.

Mold machinery is used to form the tool of goods, this tool has a variety of components, different mold is composed of different parts. It mainly deals with the shape of the material by changing the physical state of the formed material. In the punching, stamping, forging, cold forging, extrusion, powder metallurgy compaction, pressure casting, and engineering plastics, rubber, ceramic products such as plastic pressure or injection molding processing, which under the action of external force and the blank into a specific shape and size of workpiece tool.

            Model

         CX-1210

X, Y working area

1200mm*1000mm

Z working area

200mm

Feeding height

200mm

Lathe structure

Cast iron

Table structure

Cast iron

Operation precision

±0.01/300mm

Spindle rotating route

0-24000rpm

Control system

NCStudio

Motor

Imported Japanese servo motor

Tool diameter

3.175mm, 4mm, 6mm

Spindle power

3 kw

 

Mould Machine

Mould Machine,Cnc Rotary Die Making Machine,Wood Rotary Die Making Machine,Injection Molding Moulding Machine

JINAN HT MACHINERY CO.,LTD , http://www.jncncrouter.com