Technology Features  1. Small metal like a paper clip can be detected; suitable for high level security inspection 2220mm(H) x820mm(W)x500mm(D) 2000mm(H)x700mm(W)x500mm(D) 70KG 0.3m at low sensitivity;0.5m at high sensitivity LED on door frame Keypad With the highest sensibility, it can detect the metal Article as small as the clip. The intelligent counter can calculate the number of the Passenger flow and the times of alarming. Allocation of six mutual over-lapping detecting areas, Simultaneous alarming 5C-40C / 0%-90%(non-condensin Technology Features  1. Small metal like a paper clip can be detected; suitable for high level security inspection 2220mm(H) x820mm(W)x500mm(D) 2000mm(H)x700mm(W)x500mm(D) 70KG 0.3m at low sensitivity;0.5m at high sensitivity LED on door frame Keypad With the highest sensibility, it can detect the metal Article as small as the clip. The intelligent counter can calculate the number of the Passenger flow and the times of alarming. Allocation of six mutual over-lapping detecting areas, Simultaneous alarming 5C-40C / 0%-90%(non-condensin
Ball
Joint:
The main function of the Ball Joint is to realize the
upper and lower bounce and turn motion of the wheel.
Structure:
There are two kinds of main structure of
the ball joint: one is spherical joint combined with the whole joint, the other
is a hemispherical joint combined. Before using helical spring structure preloading
and wear compensation, now what is widely used is elastic and lubrication
synthetic resin tee which can reduce the cost and improve the maneuverability
and stability. In addition, the material and shape of the dust cover, oil type
has greatly improved, cancel the grease nozzle,of free maintenance.
Ball joint is mainly composed of an end
cover, ball pin, tee and dust cover form.
Connection
mode:
Due to the size and type of the spatial
arrangement of the Control Arm, ball joint is connected with the control arm is
as follows, bolt or rivet connection, directly pressed into the control arm and
the control arm as one. From the ball head pin development trend, now more and
more with the control arm as a whole the fixed ball pin, to meet the needs of
small space occupation, convenient loading and low cost requirements. But the
type of ball head pin of the service life of the demand is higher, so as to
avoid the abrasion of the ball head pin or a failure. The whole control arm and
the steering knuckle ball pin connection adopt 1/6~1/10 taper fitting manner.
Perforce
Requirement:
It should have sufficient swing angle, in
order to meet the requirements of wheel jumping up and down; small friction
moment is to ensure that the steering important factors and easy manipulation;
should not be caused by clearance of wheel shimmy and abnormal noise; good
sealing performance, to ensure that the ball head pin can be used in water and
low temperature environment should have the strength and durability; enough to
withstand the force and vibration, the wheel came.
Manufacturing:
For independent suspension front and rear
suspension of the ball head pin is an important safety component protection,
must be used to ensure the quality of the production process.
1)Attention to the full joint. For hot
forging, cold forging, pressing or casting method for manufacturing blank, then
cutting. Control of materials and heat treatment is a key factor.
(2) Ball pin machining way for cold forging
products is the mainstream. In the heat treatment of the material control is
the key factor, in addition to the products of conical connection type, its
size accuracy is the key factor of stable fatigue limit, need to take measures
in size control of cold forging;
(3) Polyacrylate and polyester elastomer
synthetic resin material structure with elastic effect to become the
mainstream. In this structure, need tee shape, material design measures, to
ensure the production of stable precision molding in the mold, making the fine
The degree of control is the key factor.
(4) The structure of ball joint assembly,
assembly methods are different, but most of the rolling wheel is the main way.
As to prevent the process of different products, bad products, assembly error
and so on, take corresponding measures to prevent mistakes, also used to check
the torque. Shake angle digital inspection machine, and combining them together
to set in the procedure.
Ball Joint Ball Joint,Rod End Joint,Rack End Joint,Auto Tie Rod End Ball Joint VESTA Motoring Ltd , http://www.vesta-industry.com
SA-IIICÂ high sensitivity digital walkthrough metal detector use excellent electromagnetic testing and digital processing technology, has high detection sensitivity of the magnetic metal and nonmagnetic metal, and good recognition for personal items such as coins, keys, belt buckle, etc.
Â
 2. With multi-zone high-brightness LED lights and indicate accurate location with sound alarm
 3. Combine digital and simulated technology, super high anti-interference ability, reduce the error alarm
 4. Strong ability for self-diagnosis; running status monitoring; error alarm with sound and light
 5. The outer cover is made of high strength material, which has a strong capability of waterproof, fireproof, anticorrosion and  shockproof
 6. Modular design, easy installation and maintenance
Outer frame
Inner frame
Unit weight
Max distance
Electrical Current
AC100V-240V Â 50/60Hz
PowerÂ
12 W
Work Environment
-20 to +45 degree
Sensitive adjustable
0-299
AlarmÂ
sound and light
Screen
LED showing numbers
Counting
traffic and alarming
Detecting Zones
6/12/18 zones in options
Light bar
Operation way
Sensibilty
With the range of 0-100, it can be adjusted the Sensibility easily, pre-set the weight, volume,
size and location in respect of the metal Articles and eliminate the false alarming for the coin, key,
jewelry, leather belt button, etc.
Infrared counting
Detecting areas
from multi-areas and accurately ascertaining the location Of the metal articles according to
the layout of the metal articles.
Operation temperature/Humidity
Functions:
Walkthrough Metal Detector can easily detect dangerous items, knife, weapons and gun, and any metal article which is hidden in human body.
RFQ:
Are you manufacturer?
Yes, we are professsional manufacturer of security threats detection system in south of China.
Stable quality and foremost service always be the key that we focus on.
How many days we can get the machine after payment?
Normally, with stock only need 3-5 days for leading time.
Without stock, need 10-15 days to manage the production.
Delivery by sea, air for your choices.Â
How about the warranty and services?
Provide one year warranty and lifetime technic support.
Accept to send our engineer to your country for training in additional cost.
Free training one-on-one in our factory for free.
Security Products Hot Sales Door Frame Walk Through Metal Detector
SA-IIICÂ high sensitivity digital walkthrough metal detector use excellent electromagnetic testing and digital processing technology, has high detection sensitivity of the magnetic metal and nonmagnetic metal, and good recognition for personal items such as coins, keys, belt buckle, etc.
Â
 2. With multi-zone high-brightness LED lights and indicate accurate location with sound alarm
 3. Combine digital and simulated technology, super high anti-interference ability, reduce the error alarm
 4. Strong ability for self-diagnosis; running status monitoring; error alarm with sound and light
 5. The outer cover is made of high strength material, which has a strong capability of waterproof, fireproof, anticorrosion and  shockproof
 6. Modular design, easy installation and maintenance
Outer frame
Inner frame
Unit weight
Max distance
Electrical Current
AC100V-240V Â 50/60Hz
PowerÂ
12 W
Work Environment
-20 to +45 degree
Sensitive adjustable
0-299
AlarmÂ
sound and light
Screen
LED showing numbers
Counting
traffic and alarming
Detecting Zones
6/12/18 zones in options
Light bar
Operation way
Sensibilty
With the range of 0-100, it can be adjusted the Sensibility easily, pre-set the weight, volume,
size and location in respect of the metal Articles and eliminate the false alarming for the coin, key,
jewelry, leather belt button, etc.
Infrared counting
Detecting areas
from multi-areas and accurately ascertaining the location Of the metal articles according to
the layout of the metal articles.
Operation temperature/Humidity
Functions:
Walkthrough Metal Detector can easily detect dangerous items, knife, weapons and gun, and any metal article which is hidden in human body.
RFQ:
Are you manufacturer?
Yes, we are professsional manufacturer of security threats detection system in south of China.
Stable quality and foremost service always be the key that we focus on.
How many days we can get the machine after payment?
Normally, with stock only need 3-5 days for leading time.
Without stock, need 10-15 days to manage the production.
Delivery by sea, air for your choices.Â
How about the warranty and services?
Provide one year warranty and lifetime technic support.
Accept to send our engineer to your country for training in additional cost.
Free training one-on-one in our factory for free.
Model NO.: SA-IIIC
Power: 15W
Gross Weight: 95kg
Outer Frame: 2220mm (H) X 820mm (W) X 522mm (D)
Inner Frame: 2000mm (H) X 700mm (W) X 522mm (D)
Electric Current: AC215V~230V 50/60Hz
Alarming count: Yes
Trademark: SAFE HI-TEC
Transport Package: Wooden Packing
Specification: CE, ISO
Origin: China
HS Code: 8543709100
Model NO.: SA-IIIC
Power: 15W
Gross Weight: 95kg
Outer Frame: 2220mm (H) X 820mm (W) X 522mm (D)
Inner Frame: 2000mm (H) X 700mm (W) X 522mm (D)
Electric Current: AC215V~230V 50/60Hz
Alarming count: Yes
Trademark: SAFE HI-TEC
Transport Package: Wooden Packing
Specification: CE, ISO
Origin: China
HS Code: 8543709100
Security Products Hot Sales Door Frame Walk Through Metal Detector