Dura-Shred Used Tire Recycling Machine

Tire Recycling Process:
1.Prime Shredder
Dura-Shred Dual Shaft Shredder 150: 150 hp rotating the blades, truck and car size tires are reduced to rough 3"shredded strips through the Prime Shredder. Rough shred is then recirculated until it can be sent to the Grater via a conveyer.

 

2.The Grater
 Dura-Shred Grater 150: The Grater takes the chips and reduces them to 10mm-12mm. At this point 95%-97% of
the steel has been stripped and is removed with our magnet belt as the rubber mulch is transported
to the vibratory tables for separation. This will be the end of the mulch producing line. For crumb
rubber steel free mulch will be sent via conveyor to the Granulators for further processing.
  

3.Granulator
 Dura-Shred Granulator: The G1 reduces the rubber down to a 5mm-7mm or 10-20 mesh, which is then removed through a screening system. Additional steel and fiber are then removed through an air and vibratory system before being sent to the surge bin for collection.
 
 

Scope of Project:
System is designed to produce the following byproducts: Steel, Fiber, Tire Derived Fuel Chips (TDF), Rubber
Mulch, Rubber Powder.
 System Capacity:
Capacity for this system is 2.5 metric tons of input per hour.
Crumb Size:
10mm - 14mm Mulch (Can be removed after The Grater)
4mm-6mm and 10 / 20 mesh. (After the Granulators)
 Crumb Rubber Purity:
95% Free of Textile.
95% Free of Steel.
95% Free of Stones and other contaminants.
Steel Purity:
92%-94% Contaminant free.
 Power:
Power Type: 440V / 3Ph / 60Hz
Total Kilowatts: 607
Estimated Power Usage Per Hour of Operation: *** $65.56
***Based on a price of $018 per kilowatt hour.
 
Development space of market:
  The method of recycling waste tyre is that separating the inner steel wire and fiber from waste tires through many kinds of technologies and grinding the rubber granules into powder.Waste tyre treatment equipment are suitable for international development and management style. It's most advantage is it can recovery waste tyres to rubber granules/powder reaching to the availability 100%.
  Process:
 Waste tyres-- rough shredding tyre blocks into pieces (50mm-100mm)(TDF plant)--medium shredding into smaller ones(10mm-20mm)(Mulch plant)--fine shred into granules(3mm-4mm)(Crumb plant)--grind the granules into powder(20-100mesh)--magnetic separator for thin steel removing--fiber separator for rubber removing--packing




You may be interested in those following questions:
1. How much does it cost?
Answer: All of our machines are customization which means that we shall give you a proposal first, if meets your requirement then the quotation will be given to you.
2, I want to know more about your company and your products, how?
Answer: We will sent you a catalugue as well as a questionaire which covers your requiement. Your kindly reply about filling the questionaire will be greatly appreciated.
3, Have you ever sold your plant to our country?
Answer: Until now, Our products have been sold to the countried all over the world, such as America, Italy, Poland, India, south Africa, Japan, Pakistan, Columbia and so on.....
4, Can I go to your company to test those machines?
Answer: We welcome you at anytime!!!
.......
 
Any other requirements or questions about our Dura-Shred used tire recycling machine, be free to contact me!

Tire Recycling Process:
1.Prime Shredder
Dura-Shred Dual Shaft Shredder 150: 150 hp rotating the blades, truck and car size tires are reduced to rough 3"shredded strips through the Prime Shredder. Rough shred is then recirculated until it can be sent to the Grater via a conveyer.

 

2.The Grater
 Dura-Shred Grater 150: The Grater takes the chips and reduces them to 10mm-12mm. At this point 95%-97% of
the steel has been stripped and is removed with our magnet belt as the rubber mulch is transported
to the vibratory tables for separation. This will be the end of the mulch producing line. For crumb
rubber steel free mulch will be sent via conveyor to the Granulators for further processing.
  

3.Granulator
 Dura-Shred Granulator: The G1 reduces the rubber down to a 5mm-7mm or 10-20 mesh, which is then removed through a screening system. Additional steel and fiber are then removed through an air and vibratory system before being sent to the surge bin for collection.
 
 

Scope of Project:
System is designed to produce the following byproducts: Steel, Fiber, Tire Derived Fuel Chips (TDF), Rubber
Mulch, Rubber Powder.
 System Capacity:
Capacity for this system is 2.5 metric tons of input per hour.
Crumb Size:
10mm - 14mm Mulch (Can be removed after The Grater)
4mm-6mm and 10 / 20 mesh. (After the Granulators)
 Crumb Rubber Purity:
95% Free of Textile.
95% Free of Steel.
95% Free of Stones and other contaminants.
Steel Purity:
92%-94% Contaminant free.
 Power:
Power Type: 440V / 3Ph / 60Hz
Total Kilowatts: 607
Estimated Power Usage Per Hour of Operation: *** $65.56
***Based on a price of $018 per kilowatt hour.
 
Development space of market:
  The method of recycling waste tyre is that separating the inner steel wire and fiber from waste tires through many kinds of technologies and grinding the rubber granules into powder.Waste tyre treatment equipment are suitable for international development and management style. It's most advantage is it can recovery waste tyres to rubber granules/powder reaching to the availability 100%.
  Process:
 Waste tyres-- rough shredding tyre blocks into pieces (50mm-100mm)(TDF plant)--medium shredding into smaller ones(10mm-20mm)(Mulch plant)--fine shred into granules(3mm-4mm)(Crumb plant)--grind the granules into powder(20-100mesh)--magnetic separator for thin steel removing--fiber separator for rubber removing--packing




You may be interested in those following questions:
1. How much does it cost?
Answer: All of our machines are customization which means that we shall give you a proposal first, if meets your requirement then the quotation will be given to you.
2, I want to know more about your company and your products, how?
Answer: We will sent you a catalugue as well as a questionaire which covers your requiement. Your kindly reply about filling the questionaire will be greatly appreciated.
3, Have you ever sold your plant to our country?
Answer: Until now, Our products have been sold to the countried all over the world, such as America, Italy, Poland, India, south Africa, Japan, Pakistan, Columbia and so on.....
4, Can I go to your company to test those machines?
Answer: We welcome you at anytime!!!
.......
 
Any other requirements or questions about our Dura-Shred used tire recycling machine, be free to contact me!

We are an expert manufacturer for all standards of flanges, special flanges and forging parts. The annual output is 1000 tons of flanges per month.

supply GOST12820-80 PLATE FLANGE, PLAIN FLANGE, FLAT FLANGE,Steel Flat Flange, Raised Face Flange, monthly output 3000Ton:

4) GOST12820-80 PN25, PN2.5MPA, DN15-DN1200, PLATE FLANGE, FLAT FLANGE, PLAIN FLANGE, SLIP ON FLANGE, 20# steel, CT20 Steel

GOST 12820-80 Flat Flange

GOST 12820-80 Flat Flange,GOST 12820-80 Cast Flat Flange,Steel Flat Flange

Hebei Jimeng Yongxing Flange Pipe Fittings Co.,Ltd , http://www.yxflange.com