New Graphite Shaft,Golf Shaft,Graphiet Shaft Titanium And Titanium Alloy Co., Ltd. , http://www.nstitaniumalloy.com
www.cngoshen.com
We can provide many material bolt , like :austenitic, martensitic, ferritic, duplex, precipitation hardening and super alloys stainless steel fastener and super alloys.
Â
Type 304
The most common of austenitic grades, containing approximately 18% chromium and 8% nickel. It is used for chemical processing equipment, for food, dairy, and beverage industries, for heat exchangers, and for the milder chemicals.
Type 316
Contains 16% to 18% chromium and 11% to 14% nickel. It also has molybdenum added to the nickel and chrome of the 304. The molybdenum is used to control pit type attack. Type 316 is used in chemical processing, the pulp and paper industry, for food and beverage processing and dispensing and in the more corrosive environments. The molybdenum must be a minimum of 2%.
Type 317
Contains a higher percentage of molybdenum than 316 for highly corrosive environments. It must have a minimum of 3% "moly". It is often used in stacks which contain scrubbers.
Type 317L
Restricts maximum carbon content to 0.030% max. and silicon to 0.75% max. for extra corrosion resistance.
Type 317LM
Requires molybdenum content of 4.00% min.
Type 317LMN
Requires molybdenum content of 4.00% min. and nitrogen of .15% min.
Type 321
Type 347 These types have been developed for corrosive resistance for repeated intermittent exposure to temperature above 800 degrees F. Type 321 is made by the addition of titanium and Type 347 is made by the addition of tantalum/columbium. These grades are primarily used in the aircraft industry.
Type 430
The basic ferritic grade, with a little less corrosion resistance than Type 304. This type combines high resistance to such corrosives as nitric acid, sulfur gases, and many organic and food acids.
Type 405
Has lower chromium and added aluminum to prevent hardening when cooled from high temperatures. Typical applications include heat exchangers.
Type 409
Contains the lowest chromium content of all stainless steels and is also the least expensive. Originally designed for muffler stock and also used for exterior parts in non-critical corrosive environments.
Type 434
Has molybdenum added for improved corrosion resistance. Typical applications include automotive trim and fasteners.
Type 436
Type 436 has columbium added for corrosion and heat resistance. Typical applications include deep-drawn parts.
Type 442
Has increased chromium to improve scaling resistance. Typical applications include furnace and heater parts.
Type 446
Contains even more chromium added to further improve corrosion and scaling resistance at high temperatures. Especially good for oxidation resistance in sulfuric atmospheres.
we supply only the highest quality stainless steel screws and other fasteners - from nuts and bolts to spacers and standoffs. We make it our business to supply you with durable hardware in the quantities you need. Contact us today to learn more about what we offer and how we can work with you to deliver quality screws in bulk for all of your projects.
www.cngoshen.com
We can provide many material bolt , like :austenitic, martensitic, ferritic, duplex, precipitation hardening and super alloys stainless steel fastener and super alloys.
Â
Type 304
The most common of austenitic grades, containing approximately 18% chromium and 8% nickel. It is used for chemical processing equipment, for food, dairy, and beverage industries, for heat exchangers, and for the milder chemicals.
Type 316
Contains 16% to 18% chromium and 11% to 14% nickel. It also has molybdenum added to the nickel and chrome of the 304. The molybdenum is used to control pit type attack. Type 316 is used in chemical processing, the pulp and paper industry, for food and beverage processing and dispensing and in the more corrosive environments. The molybdenum must be a minimum of 2%.
Type 317
Contains a higher percentage of molybdenum than 316 for highly corrosive environments. It must have a minimum of 3% "moly". It is often used in stacks which contain scrubbers.
Type 317L
Restricts maximum carbon content to 0.030% max. and silicon to 0.75% max. for extra corrosion resistance.
Type 317LM
Requires molybdenum content of 4.00% min.
Type 317LMN
Requires molybdenum content of 4.00% min. and nitrogen of .15% min.
Type 321
Type 347 These types have been developed for corrosive resistance for repeated intermittent exposure to temperature above 800 degrees F. Type 321 is made by the addition of titanium and Type 347 is made by the addition of tantalum/columbium. These grades are primarily used in the aircraft industry.
Type 430
The basic ferritic grade, with a little less corrosion resistance than Type 304. This type combines high resistance to such corrosives as nitric acid, sulfur gases, and many organic and food acids.
Type 405
Has lower chromium and added aluminum to prevent hardening when cooled from high temperatures. Typical applications include heat exchangers.
Type 409
Contains the lowest chromium content of all stainless steels and is also the least expensive. Originally designed for muffler stock and also used for exterior parts in non-critical corrosive environments.
Type 434
Has molybdenum added for improved corrosion resistance. Typical applications include automotive trim and fasteners.
Type 436
Type 436 has columbium added for corrosion and heat resistance. Typical applications include deep-drawn parts.
Type 442
Has increased chromium to improve scaling resistance. Typical applications include furnace and heater parts.
Type 446
Contains even more chromium added to further improve corrosion and scaling resistance at high temperatures. Especially good for oxidation resistance in sulfuric atmospheres.
we supply only the highest quality stainless steel screws and other fasteners - from nuts and bolts to spacers and standoffs. We make it our business to supply you with durable hardware in the quantities you need. Contact us today to learn more about what we offer and how we can work with you to deliver quality screws in bulk for all of your projects.
Model NO.: M5-M100 1/4"-4"
Application: Machinery, Chemical Industry, Environmental, Building
Finish: Polishing
Name: Stainless Steel Hex Cap Bolt and Nuts
Sample: Free
Shipment: 5-20 Days
Package: Caton+Pallet
Port: Ningbo or Shanghai
Supply Ability: 100 Ton/Tons Per Month
Place: Zhejiang China
OEM: as The Drawing
Brand Name: Goshen
Weld: No
Trademark: Goshen
Transport Package: Caton +Pallet
Specification: m12
Origin: Zhengjiang
HS Code: 76161000
Model NO.: M5-M100 1/4"-4"
Application: Machinery, Chemical Industry, Environmental, Building
Finish: Polishing
Name: Stainless Steel Hex Cap Bolt and Nuts
Sample: Free
Shipment: 5-20 Days
Package: Caton+Pallet
Port: Ningbo or Shanghai
Supply Ability: 100 Ton/Tons Per Month
Place: Zhejiang China
OEM: as The Drawing
Brand Name: Goshen
Weld: No
Trademark: Goshen
Transport Package: Caton +Pallet
Specification: m12
Origin: Zhengjiang
HS Code: 76161000
Stainless steel hex cap bolt and nuts
Stainless steel hex cap bolt and nuts