One millimeter is equal to 1000 microns and 0.1 micron is one ten-thousandth of a millimeter. If the hair is used as a reference, 0.1 micron is equivalent to one- 900th of a single hair. In fact, at the JAC Navistar Engine Manufacturing Center, high-precision testing equipment such as 0.1 micron can be seen everywhere. From machining to finished goods storage, a Maisford engine needs to pass 20 tests. The integration of machining, installation and inspection, and manufacturing edge inspection are a distinctive feature of the Maersvault engine production process. The most demanding process and most complex processing of the cylinder processing line is equipped with the most advanced automatic mechanical processing equipment such as the German HEGETERT CNC machine tool and the German NAGEL machine, with a processing precision of 1 micron. Not only that, but also an Italian MARPOSS intelligent inspection station with a detection accuracy of up to 0.1 μm is installed between each process. Like an unarmed guard, Marposs Intelligent Inspection Station only recognizes the inspection data. If the machining accuracy does not meet the standards, it will never allow the components to enter the next process. There are 8 test stations like this in Maisford. On the left is the Marpos test station in Italy, and on the right is the German Nagler mill. Nagler's digital console Maisford's assembly process is also harsh. The assembly of cylinder block and cylinder head has a gluing process, which is done manually by many companies. In the Maasfu engine production line, the gluing process is completely completed by robots to ensure the accuracy of the amount of glue applied and the glue application position, and to avoid the quality problems of engine oil leakage caused by uneven painting. Not only that, after the assembly of the cylinder block and the cylinder head, it is also tested by the long cylinder oil channel leak tester to ensure that the engine cylinder block cylinder head is tightly fitted. Fast and accurate automatic coating machine Long cylinder oil leak tester to detect whether the cylinder head cover fit tightly In most companies, after the engine is assembled, it only passes the ignition heat test. However, in the production process initiated by Maisford, before the hot test, each engine also added a cold machine test, referred to as cold test. Cold test can identify 70% of possible quality risks, and energy saving and environmental protection Ignition of the assembled engine for thermal engine test After passing the cold test and hot test engine, after the external painting, it can go offline. However, before the storage, special inspections must be conducted on the engine by a special person. Only through the layer quality checkpoints can the certificate be affixed to all engines that meet the standards for testing and testing. Auto paint exterior paint Before the product is put into storage, the final inspection of the engine is also required Jianghuai Navistar has a highly automated, digital, and flexible engine manufacturing center consisting of six CNC machining lines with a processing accuracy of 1 micron, a fully automated assembly line, and a fully automated spraying line. The on-line inspection accuracy is 0.1 micron. , Maysford can produce both 3.2L and 4.8L diesel engines and Maisford 7.2L diesel engine to be put into production. Advanced automation and digital manufacturing methods make the engine's machining accuracy, assembly quality higher, and manufacturing efficiency higher, while minimizing the impact of human error on engine quality. 0.1 micron is just a microcosm of the quality control of the Maasfu engine production. It is the modern manufacturing process and full-time quality control that results in the quality accuracy of the Maasfu engine.
Slurry ice or liquid ice is widely used in the following field.
â— Seafood Preservation
â— Meat Processing
â— Fruit and Vegetable Preservation
â— Supermarket and Logistics
â— Cold Storage Energy Engineering
Snoworld slurry ice machines is designed for fishery industry. The mixture of ice crystal and water solution has more contact area than any other ice type and doesn`t do any harm to the skin of seafood. Thus, slurry ice has the highest efficiency in seafood preservation. The Slurry Ice Machine production capacity (tons/24 hours) is 5, 10, 15, 20, 25 and 37.5.
Snoworld slurry ice machine has several features.
â— Applicable to almost all sea areas, from sea water or 2.9% concentration brine.
â— Compact structure, ideal for small spaces such as cabins on the ship.
â— Semi-closed ice maker with good visibility, easy to adjust, clean and maintain.
â— The ice maker designed and manufactured according to the pressure vessel standard , safe and reliable.
â— Compared with similar products of other companies, the evaporation temperature is higher, the efficiency is higher, and the energy-saving is better.
â— The ice maker is not easy to freeze stuck by adopting unique operating technology with high reliability.
â— The whole machine is designed with corrosion- resistant components, longer service life.
Slurry Ice Machine Slurry Ice Machine,Industrial Slurry Ice Machine,Slurry Ice Making Machine,Slurry Ice Machine Custom Fujian Snowman Trade Co., Ltd. , https://www.sinoicemachine.com
The cold test is to drive the engine with the motor under the condition that the engine does not add fuel or coolant, and it is tested whether the operation of the various components of the engine under running condition meets the standards. The engine cold test is currently the latest test technology. There are only a few engine factories in China. Cold machine test can identify 70% of quality hazards on the assembly line. The remaining 30% is submitted to the heat engine test. 
